we are assured to offer our buyers versatile and diversified solutions. We inspect each piece of bearing by ourselves just before supply. We are aiming to meet up with the calls for of the clients close to the world.. Introduction:
one. HS sequence slurry pump is designed for the continuous pumping of substantial abrasive, EPT slurries with minimum upkeep requirements. The donning areas are created of ultra chrome or and rubber. It will preserve high effectiveness in excess of the use daily life of its parts.
two. The metallic moist elements and rubber types can be interchangeable for managing various liquids or slurries.
three. HS slurry pumps are accessible in measurements ranging from one inch to 18 inch discharge and attribute large efficiency efficiency able of circulation charges from 10.8 to 5400 m sup3/h and heads up to 125 meters for high head models.
Characteristics:
one. Cylindrical structure of bearing assembly: handy to modify the space between impeller and JCEP liner
and can beremoved entirely
two. Interchangeable anti-abrasive moist elements manufactured of large-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs give higher functioning strain abilities
and an further evaluate of safety.
four. The discharge branch can be oriEPTTd to any eigEPTT positions at the interval of forty five degrees
five. Various EPT sorts: DC(immediate connection), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR manage, and so on
6. The shaft seal makes use of the EPTT seal, expeller seal and mechanical seal
Typical Software:
| #8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
| #8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
| #8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Waste sludge | #8226 Coarse sand |
| #8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
| #8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
| #8226 Iron ore sand | #8226 JCEP Concentration | #8226 EPT EPT | #8226Molybdenum |
| Product | Max EPTT (Kw) |
Inlet amp Outlet dimension (inch) | EPT for Dress in Components | Circulation Charge (Q) | EPT (H) meter |
Velocity (RPM) |
EPTTeller Dia. (mm) |
|
| m sup3/hr | l/s | |||||||
| 25HS-B | 15 | 1.5/one | M | twelve.six~28.8 | 3.five~8 | 6~68 | 1200~3800 | 152 |
| R | ten.eight~twenty five.two | 3~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | fifteen | 2/one.five | M | 32.4~72 | 9~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | twenty five.2~fifty four | 7~fifteen | 5.five~forty one | a thousand~2600 | 178 | |||
| 50HS-C | thirty | three/two | M | 39.6~86.four | eleven~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/3 | M | 86.4~198 | 24~fifty five | 9~fifty two | a thousand~2200 | 245 |
| R | seventy nine.2~one hundred eighty | 22~fifty | five~34.five | 800~1800 | 245 | |||
| 100HS-D | sixty | six/4 | M | 162~360 | forty~100 | twelve~56 | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~ninety | 12~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/six | M | 360~828 | one hundred~230 | 10~61 | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | 7~49 | four hundred~one thousand | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~four hundred | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | 11~sixty one | 400~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | seven~68 | 300~800 | 762 |
| R | 720~1620 | 200~450 | 7~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | thirteen~forty four | 300~500 | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven-hundred~1500 | 13~57 | 200~four hundred | 1370 |
| 25HHS-C | thirty | 1.5/one | M | sixteen.two~34.2 | 4.5~9.five | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | three/two | M | 68.four~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | four/3 | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | six/four | M | 324~720 | ninety~two hundred | 30~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | twenty~ninety four | 500~one thousand | 711 |
For the substance of donning elements,
quotM quot = steel, extremely chromium alloy quotR quot = anti-abrasive rubber
Contact
Welcome to contact us any time for information.
Your inquiry will get our prompt focus and reaction !
