Product Description

Densen Customized hydraulic coupling,hydraulic drive coupling,flexible couplings for conveyor

Product show

Company Information

Equipment

Application Case

Typical case of diaphragm coupling applied to variable frequency speed control equipment

JMB type coupling is applied to HangZhou Oilfield Thermal Power Plant

According to the requirements of HangZhou Electric Power Corporation, HangZhou Oilfield Thermal Power Plant should dynamically adjust the power generation according to the load of the power grid and market demand, and carry out the transformation of the frequency converter and the suction fan. The motor was originally a 1600KW, 730RPM non-frequency variable speed motor matched by HangZhou Motor Factory. The speed control mode after changing the frequency is manual control. Press the button speed to increase 10RPM or drop 10RPM. The coupling is still the original elastic decoupling coupling, and the elastic de-coupling coupling after frequency conversion is frequently damaged, which directly affects the normal power generation.

It is found through analysis that in the process of frequency conversion speed regulation, the pin of the coupling can not bear the inertia of the speed regulation process (the diameter of the fan impeller is 3.3 meters) and is cut off, which has great damage to the motor and the fan.

Later, they switched to the JMB460 double-diaphragm wheel-type coupling of our factory (patent number: ZL.99246247.9). After 1 hour of destructive experiment and more than 1 year of operation test, the equipment is running very well, and there is no Replace the diaphragm. 12 units have been rebuilt and the operation is in good condition.

Other Application Case

Spare parts

Packaging & Shipping

Contact us

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More

Can Drive Couplings Handle Reversing Loads and Shock Loads Effectively?

Yes, drive couplings are designed to handle reversing loads and shock loads effectively in various industrial applications. Their ability to accommodate these dynamic loads makes them suitable for many power transmission scenarios. Here’s how drive couplings handle reversing loads and shock loads:

• Reversing Loads: Drive couplings, especially flexible couplings like elastomeric, grid, and gear couplings, can handle reversing loads without difficulty. These couplings have torsional flexibility, which allows them to compensate for angular misalignments and absorb shocks during load reversals. As the direction of the load changes, the coupling flexes and adjusts accordingly, minimizing stress on the connected equipment. This flexibility also reduces the wear and tear on both the coupling and the connected machinery, leading to improved durability and extended service life.
• Shock Loads: Drive couplings are engineered to handle shock loads efficiently. Shock loads are sudden, high-intensity forces that can occur during equipment start-ups, stops, or unexpected changes in operating conditions. Elastomeric couplings are particularly effective in damping these shock loads due to the flexibility of their elastomeric elements. Grid couplings with a spring-like grid structure and gear couplings with rigid teeth also excel at distributing and absorbing shock loads. Even chain couplings, designed with roller chains, can effectively handle shock loads by absorbing the impact through the rollers and chain links.

When selecting a drive coupling for an application that involves reversing loads or shock loads, it’s essential to consider factors such as the magnitude and frequency of the loads, the operating environment, and the specific coupling’s design capabilities. Manufacturers often provide load capacity charts and guidelines to help users select the appropriate coupling for their requirements.

Proper maintenance and regular inspections are also essential to ensure that the coupling remains in good working condition. Monitoring the coupling’s performance and addressing any signs of wear or damage promptly can prevent unexpected failures and enhance the overall reliability of the power transmission system.

Understanding the Torsional Stiffness and Damping Characteristics of Drive Couplings

Torsional stiffness and damping are essential characteristics of drive couplings that play a significant role in the performance and behavior of mechanical power transmission systems. Let’s explore these two properties:

Torsional Stiffness:

Torsional stiffness refers to the ability of a drive coupling to resist angular deflection or twisting when subjected to a torque load. It is a measure of the coupling’s rigidity and is typically represented by a spring constant. A coupling with high torsional stiffness will exhibit minimal angular deflection when torque is applied, providing a more direct transfer of rotational power. On the other hand, a coupling with lower torsional stiffness allows for some flexibility and misalignment tolerance.

Drive couplings with high torsional stiffness are commonly used in applications where precision and accurate torque transmission are crucial, such as precision machinery and high-speed power transmission systems. Couplings with lower torsional stiffness are employed in situations where flexibility and shock absorption are needed to protect connected components from sudden torque spikes and vibrations.

Torsional Damping:

Torsional damping characterizes the ability of a drive coupling to dissipate energy in the form of heat when subjected to torsional vibrations. Damping reduces the amplitude of vibrations and prevents resonance, which can be detrimental to the coupling and the entire power transmission system.

Drive couplings with adequate torsional damping can absorb and dampen torsional vibrations, preventing excessive wear on the coupling and the connected machinery. The damping capacity of the coupling is determined by its material properties and design. High torsional damping is especially important in applications where the drive system experiences varying torque loads and vibrations, as it helps maintain stability and extends the life of the coupling and other mechanical components.

Both torsional stiffness and damping are critical factors to consider when selecting a drive coupling for a specific application. The appropriate coupling choice will depend on the desired level of rigidity, flexibility, and vibration absorption required for the mechanical power transmission system.

Advantages of Using Drive Couplings in Automotive Systems

Drive couplings play a critical role in automotive systems, contributing to the efficient and reliable operation of various components. They are used in several applications within vehicles, providing several advantages that enhance performance, comfort, and safety. Here are some of the key advantages of using drive couplings in automotive systems:

• Smooth Power Transmission: Drive couplings efficiently transmit power from the engine to different automotive components, such as the transmission, differential, and wheels. They provide a smooth power transfer, reducing energy losses and ensuring optimal performance.
• Shock Absorption: Automotive drive couplings with flexible elements, such as elastomeric materials or metal discs, absorb shocks and vibrations caused by road irregularities. This helps improve the overall comfort of the vehicle and reduces wear on drivetrain components.
• Misalignment Compensation: Misalignments can occur due to chassis flexing or other factors in automotive systems. Drive couplings with flexible elements can accommodate these misalignments, reducing stress on the connected components and extending their lifespan.
• Noise and Vibration Reduction: By dampening vibrations and noise, drive couplings contribute to a quieter and more pleasant driving experience for passengers.
• Energy Efficiency: Drive couplings ensure efficient power transmission, which is essential for maximizing fuel economy and reducing emissions in modern vehicles.
• Protection of Expensive Components: Drive couplings act as protective components by isolating the drivetrain from shocks and torque spikes. This helps prevent damage to more expensive components like the transmission and differential.
• Adaptability to Different Configurations: Automotive drive couplings are available in various designs and sizes, allowing manufacturers to adapt them to different vehicle configurations and drivetrain layouts.
• Reliability and Longevity: Properly designed and maintained drive couplings have a long service life, contributing to the overall durability and reliability of the vehicle.
• Safety Enhancement: In certain situations, such as during sudden accelerations or decelerations, drive couplings help maintain stable power delivery, thus contributing to better vehicle handling and control.
• Less Wear and Tear: By absorbing shocks and reducing vibrations, drive couplings reduce wear and tear on drivetrain components, leading to reduced maintenance requirements and longer component life.

In summary, drive couplings are essential components in automotive systems that provide numerous advantages, including smooth power transmission, shock absorption, misalignment compensation, noise reduction, energy efficiency, and increased safety. These advantages contribute to the overall performance, comfort, and longevity of vehicles in various driving conditions.

editor by CX 2024-04-30